plain carbon steel
英 [pleɪn ˈkɑːbən stiːl]
美 [pleɪn ˈkɑːrbən stiːl]
网络 碳素钢; 碳钢; 普通碳素钢; 普通碳钢; 普碳钢
双语例句
- Residual Stress and Its On-line Measurement in Cu and Ni Films on Plain Carbon Steel Substrates
钢基体电沉积Cu、Ni膜的残余应力及其在线测量 - Effects of deformation parameters on deformation induced ferrite transformation in plain carbon steel
形变参数对低碳钢形变诱导相变的影响 - A new mathematical method constituting hot rolled temperature of heavy and medium plate for plain carbon steel
普碳钢中厚板热轧温度制定的一种新的数学方法 - MATERIAL-Indicate material such as plain carbon steel, stainless steel or other alloy.
材料-说明，如碳素钢，不锈钢或其他合金材料。 - Super steel has the same chemical composition with plain carbon steel, but its yield strength is higher than plain carbon steel because it has fine grain size.
超级钢的化学成分与普通的碳素结构钢相近，但其力学性能有大幅度的提高。 - Numerical Simulation on the Effect of Ultrasonic Treatment Duration on Plain Carbon Steel Microstructure
超声处理时间对普碳钢组织的影响的数值模拟 - In plain carbon steel, carbon is the only alloy element.
只有在普碳钢中，碳才是唯一的合金元素。 - Cast steel with spheroidal graphites is a new kind of engineering material. The carbon content of it is between plain carbon steel and grey iron.
球墨铸钢指的是碳含量介于普通高碳钢和低碳灰铸铁之间的一种新型工程材料。 - Wetting behavior of nickel based and iron based amorphous filler metal foil on plain carbon steel pipe
Ni基及Fe基非晶态箔带钎料对碳素钢管的润湿行为 - Neural network prediction of corrosion resistance of plain carbon steel treated by surface alloying
用神经网络预测碳钢表面合金化处理后的耐腐蚀性能 - The history of steels for bridge construction at home and abroad has exhibited the developing route of plain carbon steel → low alloy steel → high strength steel → high performance steel ( HPS).
国内外桥梁用钢的历史表现为普碳钢→低合金钢→高强度钢→高性能钢的发展轨迹。 - Uncertainty of photometric determination of phosphorus in plain carbon steel by phosphomolybdate blue method was evaluated on the basis of EURACHEM/ CITAC-QUAM. Source of the uncertainty components was discussed and calculation, synthesis and evaluation of the uncertainty components were made.
按磷钼蓝光度法对钢材中磷进行测定，根据EURACHEM/CITAC-QUAM对测定结果的不确定度进行了评定，分析了不确定度的来源，对各分量进行了计算、合成并作出评定。 - By using solidification and melted slag theory, series mold powders of low alloy steel, plain carbon steel and high carbon steel, were developed and used in production successfully.
运用凝固理论和熔渣理论，研制开发了适用于低合金钢、普碳钢、高碳钢的系列保护渣并成功地应用于连铸生产。 - The influence of residual contents of Cu and Sn, heating temperature and holding time on reticulated surface cracking in plain carbon steel, grade 3, was investigated by means of hot bending method.
本试验以热弯曲为变形方式，在实验室条件下研究了钢3中的Cu、Sn残余元素含量、加热温度、加热时间与表面热脆的关系。 - Rolling Technology of Fine-Grain Grade ⅲ Bars with Plain Carbon Steel
普碳钢轧制细晶Ⅲ级钢筋的工艺研究 - A new type of cold rolling mill was developed for the cold rolling test of electric steel. Not only can the mill handle silicon steel, but plain carbon steel and stainless steel, etc, and dry or wet skin pass rolling of metal plate and belt.
为进行电工钢冷轧中试研究，设计了一种新型冷轧试验轧机，不仅能轧制硅钢，也能轧制普通碳素钢、不锈钢等，还能干、湿平整金属板带。 - A Study of Diffusion Coefficient of Nitrogen in Plain Carbon Steel
氮在碳素钢中扩散系数的研究 - Deformation of plain carbon steel in high temperture ferritic area
普碳钢的高温铁素体区变形 - Corrosion behavior of plain carbon steel in two-phase medium of coal and water
碳钢在煤水两相介质中的腐蚀行为 - Using the same chemical compositions as those of the cleanly plain carbon steel, by means of optimizing the parameters in rolling and cooling, the super steel which has fine grain size was produced.
利用洁净普碳钢的化学成分，通过控制轧制与轧后冷却工艺制度，可以得到内部组织均匀、细小的新一代钢材&超级钢。 - Deformation Characteristics of a Plain Carbon Steel in Ferrite Phase Range
低碳钢铁素体相区变形特性 - Influence of low temperature deformation on Microstructure and mechanical properties for plain carbon steel
低温变形对普碳钢组织及力学性能的影响 - Structure and Property Analysis of Electron Beam Alloy-Cladded Plain Carbon Steel
碳钢电子束表面合金化的组织与性能 - Heat treatment and the resulting strength of No 13 Coupler knuckle made of plain carbon steel
碳钢13号车钩钩舌的热处理与强度 - It is a new and exciting progress in steel production, using the same chemical composition with plain carbon steel, and by means of improving the rolling and cooling technology, to increase the yield stress doubled.
利用普碳钢的化学成分，通过工艺改进生产强度翻番的超级钢，是钢铁领域令人瞩目的新进展。 - The holes and defects appear at the top surface of castings during the common plain carbon steel is produced by V-process.
用V法铸造生产普通碳钢铸件易产生氧化缺陷，表现在铸件上表面有麻坑和缺损等。 - The electrochemical corrosion behavior of plain carbon steel in two-phase medium with coal and water was studied with mass loss measurements and electrochemical polarization tests.
采用失重及电化学方法研究了碳钢在煤水两相介质中的腐蚀行为。 - In the traditional steel plate shear wall system, the plain carbon steel is selected forthe infill panel.
传统钢板剪力墙的内嵌板都采用普通钢材。